0 Product(s) in cart |
Total $0.00 |

CATEGORIES


« Previous | Next »
JL Audio RD1000/1
1 of 3

JL Audio RD1000/1

  • Description

Monoblock Class D Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V

Purpose-built for subwoofer applications, the RD1000/1 monoblock amplifier delivers 1000 watts of jaw-dropping bass output into 2 ohms (14.4V, 1% THD). At the heart of this ultra-sleek and compact power plant is JL Audio’s exclusive NexD™ Class D technology, permitting high power output with exceptional efficiency and low distortion.

For your convenience, all of the RD1000/1’s controls are located on top of the amplifier, beneath a protective cover, with all connections found along one side of its chassis. Signal processing features include a 12 dB / octave low-pass filter, with continuously variable frequency selection from 50-500 Hz, and a variable bass boost EQ. Dual-range, differential-balance inputs are also onboard, capable of accepting most input voltage levels. Automatic turn-on capability (via signal sensing or DC-offset sensing) is standard, along with a set of preamp outputs so you can easily pass signals to another amplifier.

The RD1000/1 is also equipped with an onboard LED-clipping indicator. This all-new, innovative feature lets you easily set your amplifier’s input sensitivity setting, quickly and accurately, with no special equipment needed. The RD1000/1 features a durable, black powder-coated finish and a top-mounted, dual-color LED light strip that reports the overall status and condition. Control of the subwoofer level from the driver’s seat is easily accomplished with the addition of the optional RBC-1 remote level control (sold separately).

Rated Continuous (RMS) Power @ 14.4 V
@ 4 Ω     600 W RMS x 1
@ 3 Ω     800 W RMS x 1
@ 2 Ω     1000 W RMS x 1
@ 1.5 Ω     N/A

Rated Continuous (RMS) Power @ 12.5 V
@ 4 Ω     500 W RMS x 1
@ 3 Ω     650 W RMS x 1
@ 2 Ω     800 W RMS x 1
@ 1.5 Ω     N/A

General Specifications
Frequency Response     7 Hz - 500 Hz (+0, -1dB)
S/N Ratio, referred to highest rated power     >80 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
S/N Ratio, referred to 1 W     >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
Damping Factor @ 4 Ω     >1000 / 50 Hz
Damping Factor @ 2 Ω     >500 / 50 Hz
THD+N @ Rated Power     <1% @ 2 Ω per Ch.
Input Voltage Range @ RCA Inputs     Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
Min.Copper Power / Ground Wire Gauge     4 AWG wire
Fuse Rating     80 A (AFS, AGU or MaxiFuse™)

Signal Processing
Filter Mode(s)     Low-Pass only
Filter Slope(s)     12 dB/octave
Filter Frequency Range     50 Hz - 500 Hz
Detented, Calibrated Filter Freq. Potentiometer     No
Filter Defeat Function     No
Infrasonic Filter     No
Bass Boost EQ     Yes
Output Polarity Switch     No
Remote Subwoofer Level Control     Optional (RBC-1)
Remote Bass EQ Boost Control     No
Pass-Through Preamp Output     Buffered

Price: $549.00
Qty
« Previous | Next »

© 2013 - 2021 MB Audio, All rights reserved.

Responsive / Mobile Websites, Website Design, Hosting & SEO by Page 1 SEO Design LLC